奧林巴斯HTD-3-X（X=延遲塊長度分別是13mm/25mm/38mm)高溫延遲塊

保護面探頭是一種單晶縱波接觸式探頭，可與延遲線、保護膜或防磨保護蓋一起使用。

Advantages:

• Provides versatility by offering removable delay line, protective wear cap, and protective membrane
• When the transducer is used alone (without any of the options), the epoxy wear face provides good acoustic impedance matching into plastics, many composites, and other low impedance materials
• Cases are threaded for easy attachment to the delay line, protective membrane, and wear cap options

Applications:

• Straight beam flaw detection
• Thickness gaging
• High temperature inspections
• Inspection of plates, billets, bars, and forgings

High Temperature Delay Line Options

• Allows for intermittent contact with hot surfaces*
• Improves near surface resolution
• Contouring of delay lines provides better coupling on curved surfaces
• Warm temperature delay lines (WTD) can be used for room temperature applications

*Recommended usage cycle is ten seconds maximum contact followed by one minute of air cooling. However, the transducer itself should not be heated above 122°F (50°C).

X = standard delay line lengths, available in 1/2" (13 mm), 1" (25 mm), 1-1/2" (38 mm). Specify at time of ordering.

Note: For the delay lines above, a room temperature material longitudinal wave velocity of 0.100 in/μsec ±0.005 in/μsec may be used as an approximation for basic calculations. This value should not be used for engineering design calculations.

Contact us for details.

Protective Membrane Option

• Improves coupling on rough or uneven surfaces
• Dry couple to smooth, clean surfaces

*Available in 36" x 36" x 1/32" sheets. Order part number NPD-665-3101.

? Kit includes 12 Membranes, 1 ring, C-2 couplant

Protective Wear Cap Option

? The nylon wear cap provides an economical solution in applications requiring scanning or scrubbing of rough surfaces

Transducer Dimensions (in inches)

Transducer Configurator

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!